Portloginshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

portLoginShow

Displays port login status.
Synopsis
portloginshow [slotnumber/]portnumber
Availability
all users
Description
Use this command to display port login received from devices attached to the specified port. Some
information varies with the switch model and port type. The following lines appear:
Type
PID
WWN
credit
df_sz
cos
There is further information about the login after the above columns. This can include the DID (destination
identifier) that the port is logged on to.
Operands
This command has the following operands:
slotnumber
portnumber
484 Fabric OS commands
Type of login:
fe FLOGI, fabric login to fabric F_Port.
ff PLOGI, process login to specific N_Ports or well-known address,
such as name server.
fd FDISC, virtual N_Port login.
The port's 24-bit D_ID.
The port's world wide name.
The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for
FLOGIs and EE (end-to-end) credit for PLOGIs.
The default frame size for this login.
Class of services supported. This can be a combination of the following
bits:
4 Class of service includes class 2.
8 Class of service includes class 3.
For bladed systems only, specify the slot number of the port to
be configured, followed by a slash (/).
Specify a port number to be configured, relative to its slot for
bladed systems. Use
ports.
to display a list of valid
switchShow