Fwportdetailshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

fwPortDetailShow

Displays the port information for specified user ports.
Synopsis
fwportdetailshow [--p portNumber] | [--s portState]
Availability
all users
NOTE: This command requires a Fabric Watch license.
Description
Use this command to print the overall status of the ports specified. The overall status is calculated based on
the following contributors:
Port Errors
LFA
LSY
LSI
PER
INW
CRC
PSC
BLP
SFP Errors
STM
SRX
STX
SCU
SVO
The overall status can be in one of the followings:
Healthy
Marginal
Faulty
Offline
If the overall status is not healthy, the contributing factors also are listed.
Operands
If no operand is specified, all ports are displayed.
This command has the following operands:
--p portNumber
Number of link loss occurrences exceeded limit for time period
Number of sync loss occurrences exceeded limit for time period
Number of signal loss occurrences exceeded limit for time period
Number of protocol errors exceeded limit for time period
Number of invalid words exceeded limit for time period
Number of invalid CRC errors exceeded limit for time period
Port hardware state changed too often
Buffer limit port
SFP temperature is out of specification
SFP receive power is out of specification
SFP transmit power is out of specification
SFP current is out of specification
SFP voltage is out of specification
Every contributor is healthy
One or more contributors are in this status
Faulty hardware
Port has no connectivity or is disabled
Yields a port detail report for a specific port.
Fabric OS 5.x command reference guide 273