HP StorageWorks 2/64 - Core Switch Command Reference Manual page 441

When there is no connection to a port or the port is disabled, or the port is not an E_Port some of the
information in this display is not relevant, such as long distance mode, needed buffers, and link distance.
In this case, the irrelevant fields display as hyphens.
Operands
This command has the following operands:
slotnumber
portnumber
Examples
To display the long distance information a port:
switch:user> portbuffershow 17
User Port
Port Type
---- ----
16
17
18
19
See also
portCfgLongDistance
For bladed systems only, specifies the slot number of the port group to
display, followed by a slash (/).
Specifies the number of a port associated with the port group to display,
relative to its slot for bladed systems. Use
ports. This operand is optional; if omitted, this command displays the
long distance buffer information for all the port groups of the switch. In
the case where this command displays information for all the port groups
of the switch, a divider line displays between the ports of each port
group to assist in readability.
Lx Max/Resv Buffer Needed
Mode Buffers Usage
---- ------- ------ ------- ---------- ---------
- -
E L1 -
- -
- -
switchShow
Link
Buffers Distance
0 - -
54 54 50km
0 - -
0 - -
Fabric OS 5.x command reference guide 441
for a list of valid
Remaining
Buffers
54