Portcfgshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

portCfgShow

Displays port configuration settings.
Synopsis
portcfgshow [slotnumber/][portnumber]
Availability
all users
Description
Use this command to display the current configuration of all ports. If no operand is specified, all the port
configuration settings are displayed for that switch or for the Core Switch 2/64 logical switch.
The following configuration information appears:
Speed mode
Trunk Port mode
Long Distance mode
VC Link Init mode
(virtual channel)
Locked L_Port mode
Locked G_Port mode
Disabled E_Port mode
Mcast LoopBack mode
ISL R_RDY Mode mode
RSCN Suppression
Persistent Disable mode
Displays as 1G, 2G, or AN (when in auto speed negotiation
mode). This value is set by the
Displays as ON when port is set for trunking or blank (..) when
trunking is disabled on the port. This value is set by the
command.
portCfgTrunkPort
Displays as blank (..) when the mode is off, L1 when the link is
up to 50 km, or L2 when the link is up to 100 km, and also
supports LE, L0.5, and LD modes. This value is set by the
portCfgLongDistance
Displays as blank (..) when the long-distance link initialization
option is turned off and (ON) when it is turned on for long
distance mode. This value is set by the
portCfgLongDistance
Displays as ON when port is locked to L_Port only or blank (..)
when L_Port lock mode is disabled (and it behaves as a U_Port).
This value is set by the
portCfgLPort
Displays as ON when port is locked to G_Port only or blank (..)
when G_Port lock mode is disabled (and it behaves as a
U_Port). This value is set by the
Displays as ON when port is not allowed to be an E_Port or blank
(..) when the port is allowed to function as an E_Port. This value
is set by the
portCfgEPort
Displays as blank (..) when mcast loopback mode is off, and
(ON) when mcast loopback mode is enabled. This value is set by
the
portCfgMcastLoopback
Displays as ON when the port has been R_RDY-mode enabled or
blank (..) when the port is allowed to function as an E_Port. This
value is set by the
portCfgISLMode
Displays as ON when the port has RSCN suppression enabled or
blank (..) when the port has RSCN suppression disabled. This
value is set by the
portCfg
Displays as ON when the port is disabled across reboots or
power cycles or blank (..) when the port is allowed to function
normally. This value is set by the
portCfgPersistentDisable
command.
portCfgSpeed
command.
command.
command.
command.
portCfgGPort
command.
command.
command.
rscnsupr command.
command.
Fabric OS 5.x command reference guide 463