Portcfgpersistentenable - HP StorageWorks 2/64 - Core Switch Command Reference Manual

Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs Also See for StorageWorks 2/64 - Core Switch:
Table of Contents

Advertisement

portCfgPersistentEnable

Enables a port persistently.
Synopsis
portcfgpersistentenable [slotnumber/]portnumber
Availability
admin
Description
Use this command to persistently enable a port. Persistently enabled ports remain enabled across power
cycles, switch reboots, and switch enables. By default, a port is enabled persistently. The change in
configuration is effective immediately.
A persistent port enable reenables all previously set port configurations of that port. A persistently
enabled port can temporarily be disabled by the
switchDisable
The persistent switch disable or enable configuration does not alter the persistent disable or enable
configurations of the ports within the switch.
The configuration commands
enable attribute of a port.
Operands
This command has the following operands:
slotnumber
portnumber
When no operand is specified, the command reports the current port persistently enabled status for all
ports in the switch. The value of YES is displayed for ports that are persistently enabled.
Examples
To configure a port as persistently enabled and then display all ports that are persistently enabled:
switch:admin> portcfgpersistentenable 9/3
switch:admin> portcfgpersistentenable
Slot 9
---------+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---
Enabled
(output truncated)
command will also disable the persistently enabled ports of that switch.
configDefault
For bladed systems only, specify the slot number of the port to
configure, followed by a slash (/).
Specify a port number to configure, relative to its slot for bladed
systems. Use
operand is optional; if omitted, this command displays the
persistently enabled condition for all ports.
0
1
2
3
4
5
YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES
portDisable
and
portCfgDefault
to display a list of valid ports. This
switchShow
6
7
8
9
10
Fabric OS 5.x command reference guide 461
or
command. The
switchDisable
do not modify the persistent
11
12
13
14
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks fabric os 5

Table of Contents