HP StorageWorks 2/64 - Core Switch Command Reference Manual page 250

Operands
This command has the following optional operands:
-nframes count
-ports itemlist
-seed payload_pattern
-width pattern_width
-size pattern_size
Examples
To run
fportTest
switch:admin> fporttest -ports 1/0-1/15
Running fPortTest .......
Test Complete: "fporttest" Pass 10 of 10
Duration 0 hr, 0 min & 1 sec (0:0:0:127).
passed.
Diagnostics
The following are possible error messages if failures are detected:
DATA
INIT
PORT_DIED
EPI1_STATUS_ERR
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
250 Fabric OS commands
Specify the number of times (or number of frames per port) to execute
this test. If count is omitted, the default of 10 is used.
Specify the ports to test. If itemlist is omitted, the test is executed on
all online F_Ports in the specified slot.
Specify the pattern of the test packets payload. Valid values are:
0 CSPAT (default)
1 BYTE_LFST
2 CHALF_SQ
3 QUAD_NOT
4 CQRT_SQ
5 CRPAT
6 RANDOM
Specify the width of the pattern. Valid values are:
1 byte
2 word
4 quad
Specify the number of words in the test packet payload. If
pattern_size is omitted, the default value is 512.
on a switch: