Porttestshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
portTestShow
Displays information from portTest.
Synopsis
porttestshow [-ports itemlist]
Availability
admin
Description
Use this command to display a snapshot of information from portTest. The following information
appears:
•
Pass or fail information on a given port
•
Port type tested
•
Current state of
•
Type of ports asked to test (ALL_PORTS, ALL_E_PORTS, ALL_L_PORTS, ALL_F_PORTS, ALL_LB_PORTS,
or SINGLE_PORT)
•
Pattern used in testing
•
Seed used in testing
•
User delay value
•
Total iteration asked to test
•
Current test iteration
•
Total fails on this test
Consecutive fails on this test
•
• portTest
• portTest
•
Timeout value
•
Error code if any
Operands
The following operands are required:
-ports itemlist
528 Fabric OS commands
(NO TEST, TESTING, or TEST DONE)
portTest
start time
stop time
Specify a list of user ports to test. By default, all the user ports in
the current slot will be assumed. See
further details.
help pages for
itemList
Advertisement
Table of Contents
