Cfgdisable - HP StorageWorks 2/64 - Core Switch Command Reference Manual

cfgDisable

Disables a zone configuration.
Synopsis
cfgdisable
Availability
admin
NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration
Services and bundled with each B-series switch.
Description
Use this command to disable the current zone configuration. The fabric returns to nonzoning mode, in
which all devices see each other.
This command ends and commits the current zoning transaction buffer to both volatile and flash memory.
If a transaction is open on a different switch in the fabric when this command is run, the transaction on the
other switch is automatically aborted. A message is displayed on the other switches to indicate the
aborting of the transaction.
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
none
Examples
To disable the current zone configuration:
switch:admin> cfgdisable
You are about to disable zoning configuration. This
action will disable any previous zoning configuration enabled.
Do you want to disable zoning configuration? (yes, y, no, n): [no] y
See also
cfgClear
cfgEnable
cfgSave
86 Fabric OS commands