Secpolicyshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

secPolicyShow

Displays an existing security policy.
Synopsis
secpolicyshow ["listtype"[, "name"]]
Availability
all users
Description
Use this command to display the members of an existing policy in the active or defined security policy
database. You can specify which database to display. If a database is not specified, all databases are
displayed.
You can specify to display a security policy by name. If no name is specified, all policies are displayed.
This command displays the policy database one page at a time. Use
policy database without page breaks.
NOTE: This command can be executed on any FCS switch in fabric.
Operands
This command has the following operands:
listtype
name
Specify which database to display. The name for active database is Active; the
name for saved, defined database is Defined. This operand must be enclosed
in quotation marks. If not specified, all databases are displayed. This operand is
optional. Use an asterisk (*) to specify both active and defined.
Specify the name of an existing policy you want to remove members from. Valid
values for this operand are: DCC_POLICY_nnn
• FCS_POLICY
• TELNET_POLICY
• HTTP_POLICY
• API_POLICY
• RSNMP_POLICY
• WSNMP_POLICY
• SES_POLICY (HP does not support SES_POLICY)
• MS_POLICY
• SERIAL_POLICY
• FRONTPANEL_POLICY
• SCC_POLICY
• OPTIONS_POLICY
secPolicyDump
Fabric OS 5.x command reference guide 601
to display the