portCfgDefault
Restores the port configuration to default values.
Synopsis
portcfgdefault [slotnumber/]portnumber
Availability
admin
Description
Use this command to reset any special configuration values on a port to their factory defaults. You can
view the current port configuration using the
Operands
This command has the following operands:
slotnumber
portnumber
Examples
To reset a port to factory defaults:
switch:admin> portcfgdefault 1/3
See also
portCfgEPort
portCfgGPort
portCfgLongDistance
portCfgLPort
portCfgPersistentDisable
portCfgPersistentEnable
portCfgShow
portCfgSpeed
portCfgTrunkPort
448 Fabric OS commands
portCfgShow
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed
systems. Use
switchShow
command.
to list valid ports.