Utilities Reference; Cfggen; Synopsis; Description - HP BL860c Deployment Manual

6 Utilities Reference

This chapter contains reference information and usage examples for the utilities provided in the
toolkit. In other words, the manpages associated with SSTK. You can get online help for each
utility by using the -h or -? option.
This chapter contains the following manpages:
• "cfggen" (page 47)
• "CLMChecking" (page 49)
• "conrep" (page 50)
• "cpqacuxe" (page 52)
• "efibootmgr" (page 66)
• "efivar" (page 68)
• "Description" (page
• "hpacucli" (page 69)
• "hpia64info" (page 70)
• "hplpcfg" (page 71)
• "hpqlarep" (page 71)
• "hpshowdisk" (page 73)
• "hwdisc" (page 74)
• "hwquery" (page 76)
• "ifhw" (page 77)
• "parted" (page 79)

cfggen

Synopsis

cfggen <controller #> <command> <parameters> ...

Description

Linux RAID configuration utility for LSI controllers; it is a counterpart of cpqacuxe. In SSTK,
it is used for applying RAID 1 in LSI 1068 controllers.
The <controller #> is a number between 0 and 255.
Table 6-1 cfggen Commands
Commands
AUTO
CREATE
DELETE
DISPLAY
ENABLEIR
DISABLEIR
FORMAT
HOTSPARE
LIST
69)getuuid
Description
Create an IR volume without specifying drives.
Create an IR volume.
Set controller configuration to factory defaults.
Display controller, volume and physical device information.
Enable the IR capability of the controller.
Disable the IR capability of the controller.
Perform a low-level format of a SCSI hard disk drive.
Make drive a hot spare.
Lists all available LSI adapters. This command does not require <controller #>.
cfggen 47