Cfgclear - HP StorageWorks 2/64 - Core Switch Command Reference Manual

cfgClear

Clears all zone configurations.
Synopsis
cfgclear
Availability
admin
NOTE: This command requires HP Advanced Zoning, which is included within the Base Configuration
Services and bundled with each B-series switch.
Description
Use this command to clear all zone information in the transaction buffer. All defined zone objects in the
transaction buffer are deleted. If an attempt is made to commit the empty transaction buffer while a zone
configuration is enabled, you are warned to first disable the enabled zone configuration or to provide a
valid configuration with the same name.
After clearing the transaction buffer using the
commit the transaction and then disable and clear the zone configuration in flash memory for all the
switches in the fabric.
If no current zoning configuration exists, use the
NOTE: When security is enabled, this command can be issued only from the primary FCS switch.
Operands
none
Examples
To clear all zones and then clear flash memory:
switch:admin> cfgclear
The Clear All action will clear all Aliases, Zones, FA Zones
and configurations in the Defined configuration.
Do you really want to clear all configurations?
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n):
[no] n
command, use the
cfgClear
command.
cfgSave
(yes, y, no, n): [no] n
Fabric OS 5.x command reference guide
command to
cfgDisable
81