Shellflowcontroldisable - HP StorageWorks 2/64 - Core Switch Command Reference Manual

shellFlowControlDisable

Disables XON/XOFF flow control on the console serial ports.
Synopsis
shellflowcontroldisable
Availability
admin
Description
Use this command to disable XON/XOFF flow control on the console serial ports. Flow control is
disabled by default.
Because this command changes the flow control on the console serial port, it must be executed from a
session that is logged in from the console serial port. This command cannot run from a telnet session.
This setting saves in the configuration database; therefore, persistent across reboots and power cycles.
On dual control processor (CP) systems, a reboot on the standby CP is required for this command to take
effect. No action is required on the active CP.
Operands
none
Examples
To disable flow control:
switch:admin> shellflowcontroldisable
Disabling flowcontrol
flow control is now disabled
See also
shellFlowControlEnable
Fabric OS 5.x command reference guide 629