Logout - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
logout
Logs out from a telnet, rlogin, or serial port session.
Synopsis
logout
Availability
all users
Description
Use this command to log out from a telnet, rlogin, or serial port session. Telnet and rlogin connections are
closed and the serial port returns to the login: prompt.
The
command is accepted as a synonym for logout, as is Ctrl-D at the beginning of a line.
exit
NOTE:
If you close a telnet or sectelnet session by clicking the "X" in the upper-right corner, the window
closes but the session stays open until it times out. Trying to open another session before the timeout has
completed causes an error message to display.
Operands
none
Examples
To log out from an rlogin session:
switch:admin> logout
Connection to host lost.
See also
login
330 Fabric OS commands
Advertisement
Table of Contents
