Debug Snmp - Cisco MDS 9124 - Fabric Switch Reference

debug snmp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug snmp trace command is issued:
switch# debug snmp trace
Apr 29 16:03:34 snmpd[1177]: SDWRAP message Successfully processed
Related Commands Command
no debug all
show snmp
snmp-server
snmp-server enable
traps
Cisco MDS 9000 Family Command Reference
6-114
Modification
This command was introduced.
Description
Disables all debugging.
Displays SNMP status and setting information.
Configures the SNMP server information, switch location, and switch
name.
Enables SNMP server notifications (informs and traps).
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x