Fcdomain Rcf-Reject - Cisco MDS 9124 - Fabric Switch Reference

fcdomain rcf-reject

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcdomain rcf-reject
To enable the RCF reject flag for a Fibre Channel or FCIP interface, use the fcdomain option. To disable
this feature, use the no form of the command.
Syntax Description
vsan vsan-id
Defaults Enabled
Command Modes Interface configuration submode
Command History Release
1.1(1a)
Usage Guidelines Access this command from the
Use this option to configure the RCF reject option for the selected Fibre Channel or FCIP interface.
Examples The following examples show how to configure the FCIP RCF reject fcdomain feature.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# fcdomain rcf-reject vsan 1
Related Commands Command
show fcdomain
show interface fcip
Cisco MDS 9000 Family Command Reference
8-24
fcdomain rcf-reject vsan number
no fcdomain rcf-reject vsan number
Specifies a VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays global information about the FC domain configurations.
Displays an interface configuration for a specified FCIP interface.
submode.
switch(config-if)#
Chapter 8
OL-16217-01, Cisco MDS SAN-OS Release 3.x
F Commands