Dpvm Commit - Cisco MDS 9124 - Fabric Switch Reference

dpvm commit

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
dpvm commit
To apply the pending configuration pertaining to the dynamic port VSAN membership (DPVM) Cisco
Fabric Services (CFS) distribution session in progress in the fabric, use the dpvm commit command.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example shows how to commit changes to the DPVM database.
switch# config terminal
switch(config)# dpvm commit
Related Commands Command
dpvm distribute
dpvm enable
show dpvm
Cisco MDS 9000 Family Command Reference
5-40
dpvm commit
Modification
This command was introduced.
Description
Enables CFS distribution for DPVM.
Enables DPVM.
Displays DPVM information.
Chapter 5 D Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x