Port-Channel Persistent - Cisco MDS 9124 - Fabric Switch Reference

port-channel persistent

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
port-channel persistent
To convert an autocreated PortChannel to a persistent PortChannel, use the port-channel persistent
command in EXEC mode.
Syntax Description port-channel-id
Defaults
None.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
This command is not reversible. A user-created channel group cannot be converted to an autocreated
channel group.When the port-channel persistent command is applied to an autocreated channel group,
the channel group number does not change and the member ports properties change to those of a
user-created channel group. The channel mode remains active.
Examples The following example shows how to change the properties of an autocreated channel group to a
persistent channel group.
switch# port-channel 10 persistent
Related Commands Command
port-channel protocol
show interface port-channel Displays PortChannel interface information.
show port-channel
Cisco MDS 9000 Family Command Reference
18-14
port-channel port-channel-id persistent
Specifies the port channel ID. The range is 1 to 128.
Modification
This command was introduced.
Description
Enables the PortChannel protocol.
Displays PortChannel information.
Chapter 18
OL-16217-01, Cisco MDS SAN-OS Release 3.x
P Commands