Isns Distribute - Cisco MDS 9124 - Fabric Switch Reference

isns distribute

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
isns distribute
To enable Cisco Fabric Services (CFS) distribution for Internet Storage Name Service (iSNS), use the
isns distribute command. To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, iSNS must be enabled using the isns-server enable command.
You can configure the pWWN and nWWN of iSCSI initiators and permit a group of iSCSI initiators to
share a given nWWN/pWWN pair by using a proxy initiator. The number of iSCSI initiators that register
with the iSNS server is more than the number of iSCSI targets that register with the iSNS server. To
synchronize the iSCSI initiator entries across switches, you can distribute the iSCSI initiator
configuration to iSNS servers across switches.
Examples The following example shows how to initiate iSNS information distribution.
switch# config terminal
switch(config)# isns distribute
The following example shows how to cancel iSNS information distribution.
switch# config terminal
switch(config)# no isns distribute
Related Commands Command
isns-server enable
show isns
Cisco MDS 9000 Family Command Reference
11-116
isns distribute
no isns distribute
Modification
This command was introduced.
Description
Enables the iSNS server.
Displays iSNS information.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands