Clear Cdp - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear cdp

Use the clear cdp command to delete global or interface-specific CDP configurations.
Syntax Description
counters
table
interface
gigabitethernet
slot/port
mgmt 0
Defaults
None.
Command Modes Configuration mode.
Command History Release
1.1(1)
Usage Guidelines
You can issue this command for a specified interface or for all interfaces (management and Gigabit
Ethernet interfaces)
Examples The following example clears CDP traffic counters for all interfaces.
switch# clear cdp counters
switch#
The following example clears CDP entries for the specified Gigabit Ethernet interface.
switch# clear cdp table interface gigabitethernet 4/1
switch#
Related Commands Command
cdp
show cdp
OL-16217-01, Cisco MDS SAN-OS Release 3.x
clear cdp {counters | table} [interface {gigabitethernet slot/port | mgmt 0}]
Enables CDP on globally or on a per-interfaces basis.
Specifies the EXEC command to be executed.
Displays CDP parameters for an interface.
Specifies the Gigabit Ethernet interface.
Specifies the slot number and port number separated by a slash (/).
Specifies the Ethernet management interface.
Modification
This command was introduced.
Description
Configures global or interface-specific CDP settings and parameters.
Displays configured CDP settings and parameters.
Cisco MDS 9000 Family Command Reference
clear cdp
4-31