Ip Domain-List - Cisco MDS 9124 - Fabric Switch Reference

ip domain-list

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ip domain-list
To configure the IP domain list, use the ip domain-list command in configuration mode. To disable the
IP domain list, use the no form of the command.
Syntax Description
domain-name
Defaults None.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example configures the IP domain list.
switch# config terminal
switch(config)# ip domain MyList
Related Commands Command
show ip route
Cisco MDS 9000 Family Command Reference
11-52
ip domain-list domain-name
no ip domain-list domain-name
Specifies the domain name for the IP domain list. Maximum length is 80
characters.
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands