Clear Vrrp - Cisco MDS 9124 - Fabric Switch Reference

clear vrrp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear vrrp
To clear all the software counters for the specified virtual router, use the clear vrrp command in EXEC
mode.
Syntax Description
statistics
ipv4
ipv6
vr number
interface
gigabitethernet
slot/port
mgmt 0
port-channel
port-channel-number
vsan vsan-id
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
3.0(1)
Usage Guidelines None.
Examples The following example shows how to clear all the software counters for virtual router 7 on VSAN 2.
switch# clear vrrp vr 7 interface vsan2
Related Commands Command
show vrrp
vrrp
Cisco MDS 9000 Family Command Reference
4-92
clear vrrp {statistics [ipv4 | ipv6] vr number interface {gigabitethernet slot/port | mgmt 0 |
port-channel portchannel-id | vsan vsan-id}}
Clears global VRRP statistics.
Clears IPv4 virtual router statistics.
Clears IPv6 virtual router statistics.
Clears specific virtual router statistics and specifies a VR number from 1 to
255.
Clears an interface.
Clears a specified Gigabit Ethernet interface.
Specifies the management interface.
Clears a specified PortChannel interface.The ID of the PortChannel
interface is from 1 to 128.
Clears a specified VSAN. The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Added the ipv4 and ipv6 arguments.
Description
Displays VRRP configuration information.
Enables VRRP.
Chapter 4
OL-16217-01, Cisco MDS SAN-OS Release 3.x
C Commands