Poweroff Module - Cisco MDS 9124 - Fabric Switch Reference

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

poweroff module

To power off individual modules in the system, use the poweroff module command in configuration
mode. Use the no form of this command to power up the specified module.
Syntax Description
slot
Defaults None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines Use the poweroff module command to power off individual modules. The poweroff module command
cannot be used to power off supervisor modules.
Examples
The following example powers off and powers up module 1.
switch# config terminal
switch(config)# poweroff module 1
switch(config)#
switch(config)# no poweroff module 1
switch(config)#
Related Commands Command
show module
copy running-config
startup-config
OL-16217-01, Cisco MDS SAN-OS Release 3.x
poweroff module slot
no poweroff module slot
Specifies the slot number for the module.
Modification
This command was introduced.
Description
Displays information for a specified module.
Copies all running configuration to the startup configuration.
Cisco MDS 9000 Family Command Reference
poweroff module
18-33