Debug Ntp - Cisco MDS 9124 - Fabric Switch Reference

debug ntp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug ntp
To enable debugging for the Network Time Protocol (NTP) module, use the debug ntp command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description errors
info
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug ntp info command is issued:
switch# debug ntp info
2005 Mar 10 03:00:42 ntp: Dropping msg_ref with rr_token [7002722]
Related Commands Command
no debug all
show ntp
Cisco MDS 9000 Family Command Reference
6-82
debug ntp {errors | info}
no debug ntp {errors | info}
Modification
This command was introduced.
Description
Disables all debugging.
Displays the configured NTP server and peer associations.
Enables debugging for NTP error conditions.
Enables debugging for NTP information and events.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x