Cisco MDS 9124 - Fabric Switch Reference page 450

debug scsi-flow
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug scsi-flow
To enable debugging of a SCSI flow, use the debug scsi-flow command. To disable a debug command,
use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description all
demux
deque
error
event
ha
trace
detail
warning
vsan vsan-id
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(2)
Usage Guidelines
None.
Examples The following example enables all debug flags for all SCSI flows.
switch# debug scsi-flow all
2004 Nov 29 17:24:49 sfm: fu_fsm_execute_all: match_msg_id(0), log_already_open(0)
2004 Nov 29 17:24:49 sfm: fu_fsm_execute_all: null fsm_event_list
2004 Nov 29 17:24:49 sfm: fu_fsm_engine_post_event_processing: mts msg
MTS_OPC_DEBUG_WRAP_MSG(msg_id 536440) dropped
switch#
Cisco MDS 9000 Family Command Reference
6-104
debug scsi-flow {all | demux vsan vsan-id | deque | error | event vsan vsan-id | ha | trace {detail
vsan vsan-id | vsan vsan-id} | warning vsan vsan-id}
no debug scsi-flow {all | demux vsan vsan-id | deque | error | event vsan vsan-id | ha | trace
{detail vsan vsan-id | vsan vsan-id} | warning vsan vsan-id}
Enables all debug flags for all SCSI flows.
Enables debugging for SCSI flow demux functions.
Enables debugging for SCSI flow deque events.
Enables debugging for SCSI flow errors.
Enables debugging for SCSI flow events.
Enables debugging for SCSI flow high availability events.
Enables debugging for SCSI flow traces.
Enables debugging of SCSI flow detail trace.
Enables debugging for SCSI flow warning messages.
Restricts debugging to the specified VSAN. The range is 1 to 4093.
Modification
This command was introduced.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x