Discover Scsi-Target - Cisco MDS 9124 - Fabric Switch Reference

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

discover scsi-target

To discover SCSI targets on local storage to the switch or remote storage across the fabric, use the
discover scsi-target command in EXEC mode.
Syntax Description
custom-list
local
remote
vsan vsan-id
fcip fc-id
os
aix
all
hpux
linux
solaris
windows
lun
target
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(2a)
Usage Guidelines On-demand discovery only discovers Nx ports present in the name server database that have registered
a FC4 Type = SCSI_FCP.
Examples
The following example shows how to discover local targets assigned to all OSs.
switch# discover scsi-target local os all
discovery started
The following example shows how to discover remote targets assigned to the Windows OS.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
discover scsi-target {custom-list | local | remote | vsan vsan-id fcid fc-id} os {aix | all | hpux |
linux | solaris | windows} [lun | target]
Discovers SCSI targets from the customized list.
Discovers local SCSI targets.
Discovers remote SCSI targets.
Discovers SCSI targets for the specified VSAN ID. The range is 1 to 4093.
Discovers SCSI targets for the specified FCID. The format is 0xhhhhhhh,
where h is a hexadecimal digit.
Discovers the specified operating system.
Discovers the AIX operating system
Discovers all operating systems
Discovers the HPUX operating system
Discovers the Linux operating system
Discovers the Solaris operating system
Discovers the Windows operating system
Discovers SCSI targets and LUNs.
Discovers SCSI targets.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
discover scsi-target
5-31