Device-Alias (Ivr Fcdomain Database Configuration Submode) - Cisco MDS 9124 - Fabric Switch Reference

device-alias (IVR fcdomain database configuration submode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
device-alias (IVR fcdomain database configuration submode)
To map a device alias to a persistent FC ID for IVR, use the device-alias command in IVR fcdomain
database configuration submode. To remove the mapping for the device alias, use the no form of the
command.
Syntax Description device-name
fc-id
Defaults None.
Command Modes
IVR fcdomain database configuration submode.
Command History Release
2.1(2)
Usage Guidelines Only one FC ID can be mapped to a device alias.
Examples The following example shows how to map the device alias to the persistent FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# device-alias SampleName 0x123456
The following example shows how to remove the mapping between the device alias and the FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# no device-alias SampleName
Related Commands Command
ivr fcdomain database
autonomous-fabric-num
native-autonomous-fabric-num
show ivr fcdomain database
Cisco MDS 9000 Family Command Reference
5-18
device-alias device-name fc-id
no device-alias device-name
Specifies the device name. Maximum length is 64 characters.
Specifies the FC ID for the device.
Modification
This command was introduced.
Description
Creates IVR persistent FC IDs.
Creates an IVR persistent FC ID database entry.
Displays IVR fcdomain database entry information.
Chapter 5 D Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x