Snmp-Server Tcp-Session - Cisco MDS 9124 - Fabric Switch Reference

snmp-server tcp-session

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
snmp-server tcp-session
To enable one time authentication for SNMP over a TCP session, use the snmp-server tcp-session
command in configuration mode. To disable one time authentication for SNMP over a TCP session, use
the no form of the command.
Syntax Description auth
Command Default One time authentication for SNMP over a TCP session is on.
Command Modes
Configuration mode.
Command History Release
3.1
Usage Guidelines None.
Examples
The following example enables one time authentication for SNMP over a TCP session.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# snmp-server tcp-session auth
Related Commands Command
show snmp
Cisco MDS 9000 Family Command Reference
21-44
snmp-server tcp-session [auth]
no snmp-server tcp-session [auth]
Modification
This command was introduced.
Description
Displays SNMP information.
Enables one time authentication for SNMP over a TCP session.
Chapter 21
OL-16217-01, Cisco MDS SAN-OS Release 3.x
S Commands