Port-Security Enable - Cisco MDS 9124 - Fabric Switch Reference

port-security enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
port-security enable
To enable port security, use the port-security enable command in configuration mode. To disable port
security, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
Issuing the port-security enable command enables the other commands used to configure port security.
Examples
The following example shows how to enable port security.
switch# config terminal
switch(config)# port-security enable
The following example shows how to disable port security.
switch# config terminal
switch(config)# no port-security enable
Related Commands Command
show port-security
Cisco MDS 9000 Family Command Reference
18-24
port-security enable
no port-security enable
Modification
This command was introduced.
Description
Displays port security information.
Chapter 18
OL-16217-01, Cisco MDS SAN-OS Release 3.x
P Commands