Ivr Zoneset Rename - Cisco MDS 9124 - Fabric Switch Reference

ivr zoneset rename

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ivr zoneset rename
To rename an inter-VSAN routing (IVR) zone set, use the ivr zoneset rename command.
Syntax Description
current-name
new-name
Defaults None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example renames the IVR zone set from north to south.
switch# ivr zoneset rename north south
Related Commands Command
ivr zoneset name
show ivr
Cisco MDS 9000 Family Command Reference
11-146
ivr zoneset rename current-name new-name
Specifies the current zone set name. The maximum size is 64 characters.
Specifies the new zone set name. The maximum size is 64 characters.
Modification
This command was introduced.
Description
Creates and configures an IVR zone set.
Displays IVR information.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands