Debug Tcap - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug tcap

To enable debugging the exception logger, use the debug tcap command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description demux
deque
error
info
init
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
Use this command to debug terminal capture utility events and information.
Examples The following example displays the system output when the debug tcap demux command is issued:
switch# debug tcap demux
Related Commands Command
no debug all
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug tcap {demux | deque | error | info | init}
no debug tcap {demux | deque | error | info | init}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for terminal capture demux functions.
Enables debugging for terminal capture deque events.
Enables debugging for terminal capture errors.
Enables debugging for terminal capture information.
Enables debugging for terminal capture initialization.
Cisco MDS 9000 Family Command Reference
debug tcap
6-121