Debug Module - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug module

To enable debugging for switching or service modules, use the debug module command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
error
event
ha
no-powerdown
trace
module slot
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug module all command is issued:
switch# debug module all
2005 Mar 10 02:51:01 module: fu_fsm_execute_all: match_msg_id(0), log_already_open(0)
2005 Mar 10 02:51:01 module: fu_fsm_execute_all: null fsm_event_list
2005 Mar 10 02:51:01 module: fu_fsm_engine_post_event_processing: mts msg
MTS_OPC_DEBUG_WRAP_MSG(msg_id 6986564) dropped
Related Commands Command
no debug all
show module
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug module {all | error [module slot] | event | ha | no-powerdown | trace [module slot]}
no debug module {all | error [module slot] | event | ha | no-powerdown | trace [module slot]}
Modification
This command was introduced.
Description
Disables all debugging.
Displays the status of a module.
Enables debugging for all module features.
Enables debugging for module error conditions.
Enables debugging for module events.
Enables debugging for a module's high availability features.
Disables the power cycle feature for the module.
Enables debugging for a module's trace flows.
Restricts debugging to the specified module.
Cisco MDS 9000 Family Command Reference
debug module
6-81