Ip Domain-Lookup - Cisco MDS 9124 - Fabric Switch Reference

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip domain-lookup

To enable the DNS server lookup feature, use the ip domain-lookup command in configuration mode.
Use the no form of this command to disable this feature.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
Instead of IP addresses, you can configure the switch using meaningful names. The configured name
automatically looks up the corresponding IP address.
Examples The following example configures a DNS server lookup feature.
switch# config terminal
switch(config)# ip domain-lookup
Related Commands Command
show ip route
OL-16217-01, Cisco MDS SAN-OS Release 3.x
ip domain-lookup
no ip domain-lookup
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Cisco MDS 9000 Family Command Reference
ip domain-lookup
11-53