Fctimer Distribute - Cisco MDS 9124 - Fabric Switch Reference

fctimer distribute

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fctimer distribute
To enable Cisco Fabric Services (CFS) distribution for Fibre Channel timer (fctimer), use the fctimer
distribute command. To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the fctimer commit command.
Examples The following example shows how to change the default Fibre Channel timers.
switch# config terminal
switch(config)# fctimer distribute
Related Commands Command
fctimer commit
show fctimer
Cisco MDS 9000 Family Command Reference
8-58
fctimer distribute
no fctimer distribute
Modification
This command was introduced.
Description
Commits the Fibre Channel timer configuration changes to the active
configuration.
Displays fctimer information.
Chapter 8
OL-16217-01, Cisco MDS SAN-OS Release 3.x
F Commands