Chapter 2 A Command; Aaa Accounting Logsize - Cisco MDS 9124 - Fabric Switch Reference

aaa accounting logsize

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
aaa accounting logsize
To set the size of the local accounting log file, use the aaa accounting logsize command to set the size
of the local accounting log file. To revert to the default logsize 250000 bytes, use the no form of the
command.
Syntax Description aaa accounting
logsize
integer
Defaults 25,0000.
Command Modes Configuration mode.
Command History Release
1.0(2)
2.0
Usage Guidelines None.
Examples The following example shows the log file size configured at 29000 bytes.
switch# config terminal
switch(config)# aaa accounting logsize 29000
Related Commands Command
show accounting logsize
show accounting log
Cisco MDS 9000 Family Command Reference
2-2
aaa accounting logsize integer
no aaa accounting logsize
Configures accounting methods
Configures local accounting log file size (in bytes).
Sets the size limit of the local accounting log file in bytes from 0 to 250000.
Modification
This command was introduced.
This command was deprecated.
Description
Displays the configured log size.
Displays the entire log file.
Chapter 2 A Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x