Cisco MDS 9124 - Fabric Switch Reference page 375

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fc-tunnel
To enable debugging for the Fibre Channel tunnel feature, use the debug fc-tunnel command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
Syntax Description all
errors
external-events
ha
label-update
mts
pkt
pkthdr
both
tx
rx
pss
route-update
vsan vsan-id
rsvp-messages
tunnel tunnel-id
state-machine
node
opcode
sap
range
Defaults Disabled.
Command Modes EXEC mode.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug fc-tunnel {all | errors | external-events | ha | label-update | mts {pkt | pkthdr} {both | rx
| tx} | pss | route-update [vsan vsan-id] | rsvp-messages [tunnel tunnel-id | vsan vsan-id] |
state-machine}
no debug fc-tunnel {all | errors | external-events | ha | label-update | mts {pkt | pkthdr} {both
| rx | tx} | pss | route-update [vsan vsan-id] | rsvp-messages [tunnel tunnel-id | vsan vsan-id]
| state-machine}
Enables debugging for all FC tunnel features.
Enables debugging for FC tunnel errors.
Enables debugging for external FC tunnel events.
Enables debugging for FC tunnel high availability (HA) events.
Enables debugging for FC tunnel label updates.
Enables debugging for FC tunnel MTS events.
Specifies debugging of packets.
Specifies debugging of headers.
Specifies debugging in both the transmit and receive directions.
Specifies debugging in the transmit direction.
Specifies debugging in the receive direction.
Enables debugging for FC tunnel PSS events.
Enables debugging for FC tunnel route updates.
Specifies the VSAN ID. The range is 1 to 4093.
Enables debugging for FC tunnel SNMP events
Specifies the tunnel ID. The range is 1 to 255.
Enables debugging for FC tunnel traces.
Specifies the node for the packets in the receive direction.
Specifies the opcode for the packets in the receive direction.
Specifies the sap for the packets in the receive direction.
Specifies the integer range from 1 to 4096.
Cisco MDS 9000 Family Command Reference
debug fc-tunnel
6-29