Rate-Mode Bandwidth-Fairness - Cisco MDS 9124 - Fabric Switch Reference

rate-mode bandwidth-fairness

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
rate-mode bandwidth-fairness
To enable or disable bandwidth fairness among ports in a port group, use the rate-mode
bandwidth-fairness command in configuration mode. To disable bandwidth fairness, use the no form
of the command.
Syntax Description module module-id
Defaults Enabled.
Command Modes
Configuration mode.
Command History Release
3.1(2)
Usage Guidelines Enter the command separately for each module you want to enable or disable bandwidth fairness.
This feature is only supported on 48-port and 24-port 4-Gbps Fibre Channel switching modules.
Note
Examples The following example shows how to enable bandwidth fairness for a module.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# rate-mode bandwidth-fairness module 1
The following example shows how to disable bandwidth fairness for a module.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# no rate-mode bandwidth-fairness module 1
Related Commands Command
show module
bandwidth-fairness
Cisco MDS 9000 Family Command Reference
20-12
rate-mode bandwidth-fairness module module-id
no rate-mode bandwidth-fairness module module-id
Specifies the module number.
Modification
This command was introduced.
Description
Displays bandwidth fairness status.
Chapter 20
OL-16217-01, Cisco MDS SAN-OS Release 3.x
R Commands