Cisco MDS 9124 - Fabric Switch Reference page 355

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug cert-enroll
To enable debugging for the certificate enroll daemon, use the debug cert-enroll command in EXEC
mode. To disable a debug command use the no form of the command or use the no debug all command
to turn off all debugging.
Syntax Description all
config
config-lowlevel
request
request-lowlevel
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines
None.
Examples The following example displays the system output when the debug cert-enroll all command is issued:
switch# debug cert-enroll all
2006 Jan 21 00:44:52.875125 cert_enroll: cert_en_debug_conf_open: entering...
2006 Jan 21 00:44:52.875602 cert_enroll: cert_en_debug_conf_open: exiting
2006 Jan 21 00:44:52.876284 cert_enroll: cert_en_conf_close: entering...
2006 Jan 21 00:44:52.876349 cert_enroll: cert_en_conf_close: returning 0
2006 Jan 21 00:44:52.876400 cert_enroll: cert_en_enable_info_config: entering for
Cert-enroll Daemon debug
2006 Jan 21 00:44:52.876428 cert_enroll: cert_en_debug_conf_open: entering...
2006 Jan 21 00:44:52.876679 cert_enroll: cert_en_debug_conf_open: exiting
sw-46-180# 2006 Jan 21 00:44:52.876712 cert_enroll: cert_en_enable_info_config:
SET_REQ for Cert-enroll Daemon debug with 1
2006 Jan 21 00:44:52.876857 cert_enroll: cert_en_enable_info_config: SET_REQ done for
Cert-enroll Daemon debug with 1
2006 Jan 21 00:44:52.876896 cert_enroll: cert_en_enable_info_config: got back the return
value of configuration operation:success
2006 Jan 21 00:44:52.876922 cert_enroll: cert_en_debug_conf_close: entering...
2006 Jan 21 00:44:52.876965 cert_enroll: cert_en_debug_conf_close: returning 0
2006 Jan 21 00:44:52.876991 cert_enroll: cert_en_enable_info_config: exiting for
Cert-enroll Daemon debug...
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug cert-enroll {all | config | config-lowlevel | request | request-lowlevel}
no debug cert-enroll {all | config | config-lowlevel | request | request-lowlevel}
Modification
This command was introduced.
Enables all debugging flags.
Enables debugging for the certificate enroll configuration.
Enables low-level debugging for the certificate enroll configuration
Enables debugging for the certification enroll request.
Enables low-level debugging for the certification enroll request.
Cisco MDS 9000 Family Command Reference
debug cert-enroll
6-9