Cisco MDS 9124 - Fabric Switch Reference page 802

ntp
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ntp
To configure NTP settings on the switch, use the ntp command in configuration mode.
Syntax Description
peer hostname
server
tstamp-check
Defaults This command has no default settings.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples This example forms a server association with a server.
switch(config)# ntp server 10.10.10.10
switch(config)#
This example forms a peer association with a peer. You can specify multiple associations.
switch(config)# ntp peer 10.20.10.0
switch(config)#
Related Commands Command
ntp distribute
show ntp
Cisco MDS 9000 Family Command Reference
16-12
ntp {peer hostname | server | tstamp-check}
The hostname/IP address of the NTP peer (Max Size - 80).
The hostname/IP address of the NTP server (Max Size - 80).
Enables or disables the Timestamp Check.
Modification
This command was introduced.
Description
Enables CFS distribution for NTP.
Displays NTP information.
Chapter 16 N Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x