Cimserver Clearcertificate - Cisco MDS 9124 - Fabric Switch Reference

cimserver clearcertificate

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
cimserver clearcertificate
To clear the cimserver certificate, use the cimsever clearcertificate command in configuration mode.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode
Command History Release
3.3(1a)
Usage Guidelines
You need not specify the certificate name.
Examples The following example shows how to clear the cimserver certificate.
switch# config
Enter configuration commands, one per line.
switch(config)# cimserver clearcertificate
Related Commands Command
show cimserver
certificate name
Cisco MDS 9000 Family Command Reference
4-24
cimserver clearcertificate
Modification
This command was introduced.
Description
Displays cimserver certificate file name.
End with CNTL/Z.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands