Dpvm Distribute - Cisco MDS 9124 - Fabric Switch Reference

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

dpvm distribute

To enable Cisco Fabric Services (CFS) distribution for dynamic port VSAN membership (DPVM), use
the dpvm distribute command. To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Enabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, DPVM must be enabled using the dpvm enable command.
Temporary changes to the DPVM database must be committed to the active DPVM database using the
dpvm commit command before being distributed to the fabric.
Examples The following example shows how to disable distribution for the DPVM database.
switch# config terminal
switch(config)# no dpvm distribute
The following example shows how to enable distribution for the DPVM database.
switch# config terminal
switch(config)# dpvm distribute
Related Commands Command
dpvm enable
show dpvm
OL-16217-01, Cisco MDS SAN-OS Release 3.x
dpvm distribute
no dpvm distribute
Modification
This command was introduced.
Description
Enables DPVM.
Displays DPVM information.
Cisco MDS 9000 Family Command Reference
dpvm distribute
5-45