Cisco MDS 9124 - Fabric Switch Reference page 625

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example enables the store-and-forward mode for iSCSI interfaces 9/1 to 9/4.
switch(config)# interface iscsi 9/1 - 4
switch(config-if)# mode store-and-forward
The following example reverts to using the default pass-thru mode for iSCSI interface 9/1.
switch(config)# interface iscsi 9/1
switch(config-if)# mode pass-thru
Related Commands Command
iscsi enable
show interface
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Description
Enables iSCSI.
Displays an interface configuration for a specified interface.
Cisco MDS 9000 Family Command Reference
interface iscsi
11-33