Customer-Id - Cisco MDS 9124 - Fabric Switch Reference

customer-id

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
customer-id
To configure the customer ID with the Call Home function, use the customer-id command in Call Home
configuration submode. To disable this feature, use the no form of the command.
Syntax Description
customer-id
Defaults None.
Command Modes
Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example shows how to configure the customer ID in the Call Home configuration
submode.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# customer-id Customer1234
Related Commands Command
callhome
callhome test
show callhome
Cisco MDS 9000 Family Command Reference
4-144
customer-id customer-id
no customer customer-id
(Optional) Specifies the customer ID. The maximum length is 64
alphanumeric characters in free format.
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands