Clear Fc-Redirect Decommission-Switch - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear fc-redirect decommission-switch

To remove all existing FC-Redirect configurations and disable any further FC-Redirect configurations
on a switch, use the clear fc-redirect decommission-switch command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
EXEC mode
Command History Release
3.2(1)
Usage Guidelines
This command is used after write erase. The command is also used to move a switch from a fabric with
FC-Redirect configurations to another fabric. After using this command, disconnect the switch from the
fabric and reboot the switch before using it in another fabric.
Examples
The following example shows how to decommission FC-Redirect on a switch.
switch# clear fc-redirect decommission-switch
This Command removes any FC-Redirect configuration and disables
FC-Redirect on this switch. Its usage is generally recommended in
the following cases:
If NOT for the above, Decommissioning a switch MAY result in
DATA CORRUPTION.
Do you want to continue? (Yes/No) [No] Yes
Please check the following before proceeding further:
Do you want to continue? (Yes/No) [No] Yes
switch#
OL-16217-01, Cisco MDS SAN-OS Release 3.x
clear fc-redirect decommission-switch
Modification
This command was introduced.
1) After 'write erase'
2) When removing the switch from the fabric.
1) Hosts / targets connected locally are NOT involved in any
FC-Redirect configuration.
2) No application running on this switch created an FC-Redirect
Configuration
Please use the command 'show fc-redirect active-configs' to check
these.
clear fc-redirect decommission-switch
Cisco MDS 9000 Family Command Reference
4-47