Debug Tacacs - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug tacacs+

To enable debugging for boot variables, use the debug tacacs+ command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description
aaa-request
aaa-request-lowlevel
all
config
config-lowlevel
server-monitor
server-monitor-errors
Defaults
Disabled.
Command Modes
EXEC mode.
Command History Release
1.3(1)
3.0(1)
Usage Guidelines None.
Examples
The following example displays the system output when the debug tacacs+ config-lowlevel command
is issued:
switch# debug tacacs+ config-lowlevel
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: entering...
172.22.94.252# Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: exiting
Nov 20 06:39:44 tacacs: tacacs_conf_close: entering...
Nov 20 06:39:44 tacacs: tacacs_conf_close: returning 0
Nov 20 06:39:44 tacacs: tacacs_enable_info_config: entering for TACACS+ Daemon debug
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: entering...
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: exiting
Nov 20 06:39:44 tacacs: tacacs_enable_info_config: SET_REQ for TACACS+ Daemon debug with 1
Nov 20 06:39:44 tacacs: tacacs_enable_info_config: SET_REQ done for TACACS+ Daemon debug
with 1
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug tacacs+ {aaa-request | aaa-request-lowlevel | all | config | config-lowlevel |
server-monitor | server-monitor-errors}
no debug tacacs+ {aaa-request | aaa-request-lowlevel | all | config | config-lowlevel |
server-monitor | server-monitor-errors}
Modification
This command was introduced.
Added the server-monitor and server-monitor-errors options.
Enables TACACS+ AAA request debug.
Enables TACACS+ AAA request low-level debugging.
Enables Enable all the debug flags.
Enables TACACS+ configuration debugging.
Enables TACACS+ configuring low-level debugging.
Enables TACACS+ server monitoring.
Enables TACACS+ server monitor errors.
Cisco MDS 9000 Family Command Reference
debug tacacs+
6-119