Ssh Server Enable - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ssh server enable

To enable the SSH server, use the ssh server enable command in configuration mode. To disable the
SSH service, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example enables the SSH server.
switch# config terminal
switch(config)# ssh server enable
updated
The following example disables the SSH server.
switch# config terminal
switch(config)# no ssh server enable
updated
Related Commands Command
show ssh server
ssh key
OL-16217-01, Cisco MDS SAN-OS Release 3.x
ssh server enable
no ssh server enable
Modification
This command was introduced.
Description
Displays SSH server information.
Generates an SSH key.
Cisco MDS 9000 Family Command Reference
ssh server enable
21-57