Iscsi Import Target Fc - Cisco MDS 9124 - Fabric Switch Reference

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

iscsi import target fc

To allow dynamic mapping of Fibre Channel targets, use the iscsi import target fc command. To disable
this feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.1(1)
Usage Guidelines
This command directs iSCSI to dynamically import all Fibre Channel targets into iSCSI.
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
Note
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples
The following example allows dynamic mapping of Fibre Channel targets.
switch# config terminal
switch(config)# iscsi import target fc
The following example disables dynamic mapping of Fibre Channel targets.
switch(config)# no iscsi import target fc
Related Commands Command
show iscsi global
OL-16217-01, Cisco MDS SAN-OS Release 3.x
iscsi import target fc
no iscsi import target fc
Modification
This command was introduced.
Description
Displays all iSCSI initiators configured by the user..
Cisco MDS 9000 Family Command Reference
iscsi import target fc
11-89