cluster
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
cluster
To configure a cluster feature, use the cluster command.
Syntax Description
enable
Defaults
None.
Command Modes
Configuration mode.
Command History
Release
3.2(2)
Usage Guidelines
None.
Examples
The following example enables the Cisco SME clustering:
switch# config terminal
switch(config)# cluster enable
switch(config)#
Cisco MDS 9000 Family Command Reference
4-106
cluster enable
Modification
This command was introduced.
Enables or disables a cluster.
Chapter 4
OL-16217-01, Cisco MDS SAN-OS Release 3.x
C Commands