Debug Mcast - Cisco MDS 9124 - Fabric Switch Reference

debug mcast

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug mcast
To enable debugging for multicast definitions, use the debug mcast command in EXEC mode. To disable
a debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description all
error
event
mts
trace
vsan vsan-id
interface fc slot/port
pkt
pkthdr
numpkt
both
tx
rx
node
opcode
sap
range
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Cisco MDS 9000 Family Command Reference
6-78
debug mcast {all | error [vsan vsan-id] [interface fc slot/port] | event [vsan vsan-id] [interface fc
slot/port] | mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both |
rx [numpkt range] | tx}} | trace [vsan vsan-id] [interface fc slot/port]]
no debug mcast {all | error [vsan vsan-id] [interface fc slot/port] | event [vsan vsan-id] [interface
fc slot/port] | mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both
| rx [numpkt range] | tx}} | trace [vsan vsan-id] [interface fc slot/port]]
Modification
This command was introduced.
Enables debugging for all multicast definitions.
Enables debugging for multicast errors.
Enables debugging for multicast events.
Enables debugging for multicast tx/rx MTS events.
Enables debugging for multicast traces.
Restricts debugging to the specified VSAN.
Restricts debugging to the specified interface.
Specifies debugging of packets.
Specifies debugging of headers.
Specifies the number of required packets
Specifies debugging in both the transmit and receive directions.
Specifies debugging in the transmit direction,
Specifies debugging in the receive direction.
Specifies the node for the packets in the receive direction.
Specifies the opcode for the packets in the receive direction.
Specifies the sap for the packets in the receive direction.
Specifies the integer range from 1 to 4096.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x