Fcns Proxy-Port - Cisco MDS 9124 - Fabric Switch Reference

fcns proxy-port

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fcns proxy-port
To register a name server proxy, use the fcns proxy-port command in configuration mode.
Syntax Description wwn-id
vsan vsan-id
Defaults
None.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines One name server can be configured to proxy another name server and name server information can be
displayed using the CLI. The name server can be viewed using the CLI or the Cisco Fabric Manager.
All name server registration requests come from the same port whose parameter is registered or changed.
If it does not, then the request is rejected.
Examples The following example shows configuring a proxy port for VSAN 2.
switch# config terminal
switch(config)# fcns proxy-port 21:00:00:e0:8b:00:26:d vsan 2
Related Commands Command
show fcns
Cisco MDS 9000 Family Command Reference
8-36
fcns proxy-port wwn-id vsan vsan-id
no fcns proxy-port wwn-id vsan vsan-id
Specifies the port WWN, with the format hh:hh:hh:hh:hh:hh:hh:hh.
Specifies a VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays the name server database and statistical information for a specified
VSAN or for all VSANs.
Chapter 8
OL-16217-01, Cisco MDS SAN-OS Release 3.x
F Commands